Huawei SUN2000 User Manual page 126

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
Parameter
Parity mode
Comm addr
Configuring the Management System
1.
Table 7-16 Description of the parameters on the Connecting to the management system screen
Parameter
Domain name
Issue 01 (2018-05-21)
To set the management system parameters and connect to the management system,
choose Comm config > Management system settings from the Operation console
screen.
Figure 7-50 Connecting to the management system
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
Description
Specifies the parity mode of
RS485 communications,
which should be the same as
the communication parity
modes of the energy meter
and battery.
Specifies the SUN2000
address connecting to the
management system. The
address should not conflict
with the addresses of other
devices on the same bus.
Description
Specifies the IP address or
network address used for
connecting to the
management system.
Value Range
 No parity

Odd parity

Even parity
[1, 247]
Value Range
N/A
119