Huawei SUN2000 User Manual page 49

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
Figure 5-5 Pipe for routing cables
(1) Nut
Procedure
Step 1 Remove the locking nut and waterproofing bolt.
Step 2 Secure the pipe fitting to the enclosure using the nut provided with the pipe.
Step 3 Route cables through the conduit and then secure the conduit to the pipe fitting.
Step 4 Check that the cables are connected correctly and securely. Then take appropriate measures to
ensure that the pipe conduit and fitting are secured reliably, and seal the cable holes.
Figure 5-6 Installing a pipe for routing cables
(1) Locking nut
(4) Pipe nut
(7) Conduit
----End
Issue 01 (2018-05-21)
(2) Fitting
The pictured pipe is for reference only. The actual pipe may differ.
(2) Cable hole at the bottom of the SUN2000
(5) Pipe fitting
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) Conduit
(3) Waterproofing bolt
(6) Cable
42