Table of Contents
Advertisement
Battery Replacement
NOTE
Disconnect the power cord from AC line voltage to avoid electrical
shock.
1 Remove the bumper which is fitted to the front panel.
2 Remove the strips on the left and right side of the front panel.
3 Remove the front panel which is secured with two screws at each
4 Disconnect the flat cable which connects the front panel to the
5 On the right side of the chassis there is a cover secured with one
6 Now the battery can be removed from the battery holder. It is
7 Fit the new battery in the holder, take care to not short current the
8 Fit the cover again and secure it with the screw to the chassis.
9 Re-connect the flat cable of the front panel again to the chassis
10 Re-assemble the front cover.
11 Fit the strips to the sides of the front panel, again.
12 Fit the bumper to the front panel.
side.
chassis.
screw. Remove this cover.
recommended to push the battery on the top, and to pull the battery
on the bottom with one finger for easier removal.
battery on the chassis.
connector. Make sure that the pin one (red wire) is pointing to the
mid of the chassis.
Battery
85
Advertisement
Table of Contents
