Table of Contents
Advertisement
4
Configuration
Remote
configuration
Prerequisites for
local configuration
TCP/IP
configuration of
the network
adapter
...under
Windows XP
SINAUT MD740-1
! Remote configuration is possible only if the SINAUT MD740-1 is
configured for remote access (see page 64). In this case,
proceed exactly as described as from section Establish
configuration connection, page 20.
•
The computer with which you are performing the configuration
must either
-
be connected direct to the Ethernet socket of the
SINAUT MD740-1 via cross-over network cable
-
or it must have direct access via LAN to the
SINAUT MD740-1.
•
The SINAUT MD740-1 must be switched on.
•
The network adapter of the computer with which you are
performing configuration must have the following TCP/IP
configuration:
IP address: 192.168.1.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Preferred DNS server: address of the Domain Name Server
TCP/IP configuration of the network adapter under Windows XP:
1. Click on Start, Settings, Control Panel, Network
Connections: right-click on the icon for LAN adapter and click
on Properties in the context menu.
On the General tab in
the Properties of LAN
connection local
network dialogue box,
select the Internet
Protocol (TCP/IP) entry
and then click on the
Properties button to
make the following
dialogue box appear:
Configuration
19 von 105
Advertisement
Table of Contents
