Siemens SINAUT MD740-1 User Manual page 51

VPN # # # # IPsec Status
Display only:
SINAUT MD740-1
Provides information on the status of the IPSec connections.
The names of the VPN connections are on the left, their current
status on the right.
GATEWAY
denotes the communicating VPN gateways
TRAFFIC
denotes computers or networks communicating via the VPN
gateways.
ID
denotes the Distinguished Name (DN) of an X.509 certificate.
ISAKMP Status
ISAKMP Status (Internet security association and key
management protocol) is given as "established" if the two VPN
gateways involved have established a channel for key
exchange. In this case, they were able to contact each other
and all entries up to and including "ISAKMP SA" on the
configuration page of the connection were correct.
IPsec Status
IPsec Status is given as "established" when IPSec encryption is
enabled during communication. In this case, the entries under
"IPsec SA" and "Tunnel settings" were also correct.
If there are problems, it is recommended to look at the VPN logs of
the computer to which the connection was established, because
the initiating computer receives no detailed error messages for
security reasons.
The message
Configuration
51 von 105