Section 3
Unpacking, inspecting and storing
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.3
10
Inspecting product and delivery items
Identifying product
1.
Locate the protection relay's order number on the label attached to the protection
relay's case.
2.
Compare the protection relay's order number with the ordering information to
verify that the received product is correct.
Checking delivery items
•
Check that all items are included in the delivery in accordance with the delivery
documents.
Inspecting product
Protection relays require careful handling before installation on site.
•
Check the protection relay to see if any damage occurred during transportation.
If the protection relay has been damaged during transportation, make a claim against
the transport contractor, and notify the local ABB representative.
Returning a product damaged in transit
•
If damage has occurred during transport, appropriate actions must be taken
against the latest carrier. Please inform the nearest ABB office or representative.
•
Notify ABB immediately if there are any discrepancies in relation to the delivery
documents.
Storing
If the protection relay is stored before installation, it must be done in the original
transport packaging in a dry and dust-free place.
•
Observe the environmental requirements stated in the technical manual.
1MRS759115 A
REX640
Installation Manual