Section 7 Removing, Repairing And Exchanging; Product Life Cycle; Checking Protection Relay's Information; Removing Protection Relay - ABB RELION REX640 Installation Manual

1MRS759115 A
Section 7
7.1
7.2
7.3
REX640
Installation Manual
Removing, repairing and exchanging

Product life cycle

At some point of the product life cycle, the protection relay is upgraded to a next
generation unit. When selecting the original product, already consider the upgrading
and extension possibilities that the specific product offers for its whole life cycle.
The protection relay specific options can be found in Retrofit Solutions Database on
the Internet www.abb.com
ABB Product Guide from the product-specific Service & Support sheet.

Checking protection relay's information

The protection relay information includes detailed information about the device, such
as version and serial number.
• Check the protection relay's information in one of the alternative ways.
• Select Menu bar/Device information/Product identifiers on the HMI.
• Select Device information/Product identifiers on the WHMI.
The Product identifiers submenu contains product-related information including
product type, serial number, order number, production date and SW version.
The HW modules submenu contains information about the HW modules.

Removing protection relay

• Before removing the protection relay, make sure that the auxiliary power is
turned off and all wiring is disconnected.
Check with your local ABB if the protection relay can be upgraded.
Removing, repairing and exchanging
by following the links within ABB Service Guide or via
Section 7
79