Table of Contents
Advertisement
CAuTION
Make sure the product ventilation hole is not blocked. Install the product in
y
a suitably wide place (more than 10cm from the wall)
- If you install the product too close to the wall, it may be deformed or fire
-
can break out due to internal heat.
Do not block any of the ventilation openings. Install in accordance with the
y
manufacturer's instructions.
- The product can be deformed or fire can break out due to overheating
-
inside the product.
Install the product on a flat and stable place that has no risk of dropping
y
the product.
- If the product is dropped, you may be injured or the product may be
-
broken.
When installing the product on a table, be careful not to place it near the
y
edge.
- This may cause the product to fall causing serious injury to a child or
-
adult and serious damage to the product. Only use a suitable stand.
Do not place the product close to source of steam or oil such as a
y
humidifier.
- This may create a fire hazard or an electric shock hazard.
-
Keep the product away from direct sunlight.
y
- The product can be damaged.
-
Do not place the product in a built-in installation such as bookcase or rack.
y
- Ventilation required.
-
Do not unplug the power cord while the product is in use.
y
- Electrical shock can damage the product.
-
Ensure the power cord does not come into contact with hot objects such as
y
a heater.
- This may cause a fire or an electric shock hazard.
-
Most appliances recommend they be placed upon a dedicated circuit;
y
that is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged
y
wall outlets, extension cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these conditions could result in
electric shock or fire.
SAFETY INSTRUCTIONS
7
Advertisement
Table of Contents
