Siemens SIMATIC RF310M Operating Instructions Manual page 35

Interface structure of the data editor
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
One memory area of the tag is always shown in the data editor. In the drop-down list box
③
[
"Complete"
you can enter values under "Address" [
only.
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
Menu bar
Display of UID
Drop-down list box with the transponder-specific memory areas (e.g. USER FRAM, OTP, etc.)
that are displayed in the data field.
Length of the data area (the field can be edited if "Complete" is not checked)
Data field:
The data can be displayed in either hexadecimal, decimal or ASCII format.
Buttons for processing the tag data:
Read tag data
•
Write tag data
•
Display of selected tag type
The editor window contains the tag data. The size of the represented data depends on the tag
type.
(Start) address (the field can be edited if "Complete" is not checked)
"Complete" check mark: Indication of the completely selected memory area; all memory areas
of the tag are always read or written at once, independent of the memory area currently set.
], you can select and display the different memory areas of the tag. If you check
⑩
, the current memory area will be displayed complete in the editor, otherwise
⑨ ④
] and "Length" [ ] to edit the relevant data area
SIMATIC RF310M software
8.3 Edit tag data
35