Siemens SIMATIC RF310M Operating Instructions Manual page 38

Simatic ident

Hide thumbs Also See for SIMATIC RF310M:

Table of Contents

SIMATIC RF310M software

8.3 Edit tag data

Note

Errors when reading and writing due to several tags in the field of the SIMATIC RF310M

Tags that follow each other closely, and are therefore in the area of the SIMATIC RF310M at

the same time, can cause errors in reading and writing tag data.

Please ensure when executing the tag functions that the minimum distances from

transponders are observed, that is, distances between 100 and 500 mm depending on the

tag type. (See System Manual for SIMATIC RF300 or MOBY D > Plan system > Field data).

①

②

Figure 8-3

Only one tag must be located within the combined blue and gray area (

Tag in the blue area: tag can be processed

Tag in the gray area: tag cannot be processed

Tag detection range of the reader

Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618

①

②

and

SIMATIC RF310M Mobile Reader

Table of Contents