Data Transfer Between The Pc And Reader; Prerequisites; Working With Activesync Or The Synchronization Center - Siemens SIMATIC RF310M Operating Instructions Manual

Advanced functions

10.2 Data transfer between the PC and reader

10.2 Data transfer between the PC and reader
10.2.1

Prerequisites

If you want to access the supplied files and documentation, please not the following
prerequisites:
● USB driver for PSION Workabout Pro
You will find the USB driver
– of PSION (www.psionteklogix.com).
– on the DVD "RFID Systems Software & Documentation" (order number 6GT2080-
● The Active Sync program from Microsoft
You can download the current version of Microsoft Active Sync from the Internet at
Microsoft homepage (http://www.microsoft.com).
● Docking station with USB cable
A docking station with USB cable to connect the PC to the SIMATIC RF310M.
10.2.2

Working with ActiveSync or the synchronization center

The ActiveSync program (Windows XP) or Synchronization Center (Windows 7) establishes
a connection via USB to the SIMATIC RF310M. You can now copy data and programs very
easily in the manner familiar from Explorer. You only need to select the "Flash Disk"
directory in the Explorer. It is also possible to access the SIMATIC RF310M device directly
with Active Sync / Synchronization Center.
Below, the section describes how to work with the ActiveSync program.
Requirements for opening the RF310M workstation
● The USB driver for the PSION Workabout Pro is installed.
● The ActiveSync/Synchronization Center program from Microsoft is installed.
● The SIMATIC RF310M is in the docking station and connected to the PC via the USB
cable.
88
2AA20).
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
SIMATIC RF310M Mobile Reader