Table of Contents
Advertisement
•
Press the
button
PWR / DIM
brightness (dimming).
- The tuner is activated and [FM 1] (1st FM
band), 87.0 (station frequency) appears in
the display window
- The loudspeakers play back the reception from
the tuner.
•
Turn the "SEL / VOL" control knob
the volume as desired.
Turning off
L
•
Press and hold the
PWR / DIM
seconds. The background light of the control
panel
1
goes out and the display window
reads [GOODBYE]. When turning off, the
device stores all settings from the last
operation. When turning the device on again,
the last used audio storage medium or the
tuner starts to play.
Selecting and adjusting the sound
L
VOL: Volume of the loudspeakers
•
Adjust the loudspeakers to the desired volume
by turning the "SEL / VOL" control knob
BAS: Bass (lower range of the loudspeaker sound)
•
Press THE "SEL / VOL" control knob
[BAS] appears in the display window
•
Turn the "SEL / VOL" control knob
desired bass level.
Values between [-7] and [7] can be selected.
TRE: Treble (higher range of the loudspeaker sound)
•
Press the "SEL / VOL" control knob
repeatedly until [TRE] appears in the display
3
window
.
•
Turn the "SEL / VOL" control knob
desired treble level.
Values between [-7] and [7] can be selected.
BAL: Balance (difference in volume between the
left and right loudspeakers)
•
Press the "SEL / VOL" control knob
cn
and adjust the
3
. [EON] and [AF] flash.
cp
to adjust
button
cn
for two
3
cp
.
cp
until
3
.
cp
to set the
cp
cp
to set the
cp
until
[BAL] appears in the display window
•
Turn the "SEL / VOL" control knob
desired balance.
Values between [8L] and [8R] can be selected.
The mean value is [0].
FAD: Fading (difference in volume between the
front and rear loudspeakers)
•
Press the "SEL / VOL" control knob
[FAD] appears in the display window
•
Turn the "SEL / VOL" control knob
desired fading level. Values between [8F] and
[8R] can be selected. The mean value is [0].
Your settings are automatically stored.
Selecting and adjusting
L
playback functions
•
Press the "SEL / VOL" control knob
it held down for two seconds.
In order to select the next function press the
"SEL / VOL" control knob
reached the required function.
INVOL: Volume when switching on.
•
Turn the "SEL / VOL" control knob
desired volume of the car radio when
switching on.
ADJ: Time display.
•
Set the desired hour setting by turning the
"SEL / VOL" control knob
•
Set the desired minute setting by turning the
"SEL / VOL" control knob
TAVOL: Volume at which the traffic information is
played back from the tuner.
•
Turn the "SEL / VOL" control knob
desired volume of the traffic information
played through the tuner. Please ensure that
this important information for road users is
loud enough for you to hear.
Note: If the volume is too high there is a danger
that you will be startled or unable to hear other
road users.
Operation
3
.
cp
to set the
cp
until
3
.
cp
to set the
cp
and keep
cp
until you have
cp
to set the
cp
clockwise.
cp
counter clockwise.
cp
to set the
GB/IE
1
Hide quick links:
Advertisement
Table of Contents
