Table of Contents
Advertisement
Operation / Promote Control
•
USB ONE - the current track is recorded on
USB.
•
Press the
button
BD / ENT
in the display window
(flashing), information on the storage location
(e.g. [01]) and the length of the recording (e.g.
[19.58]).
Stopping Recording
•
Press the
button
BD / ENT
Recording from MP3 / WMA-CD
•
Insert an MP3 / WMA CD into the CD compart-
ment
cu
.
•
Insert an SD or MMC into the SD and MMC port
or
Insert a USB memory stick into the USB port
•
Use the
LD / MD
•
•
Select the track which you would like to record.
Starting Recording
•
Press the
SCAN REC•
pressed for two seconds. [COPY MMC]
appears in the display window
MMC is used).
or
[COPY USB] appears in the display window
(if a USB memory stick is used).
The following properties are only possible by
repeatedly pressing the
(depending on whether an SD / MMC or USB stick is
used)
•
COPY MMC- the current track is recorded on
SD / MMC.
•
COPY USB- the current track is recorded on
USB.
•
Press the
button
BD / ENT
the display window
the storage medium that is used up is displayed.
Stopping Recording
•
Press the
BD / ENT
Starting Delete
•
Use the
LD / MD
•
SD / MMC mode.
22
GB/IE
. [RECORD] appears
bs
3
, followed by [R]
bs
.
button
bu
to select CD mode.
bt
button
and keep it
3
(if an SD or
button
bt
SCAN REC•
bs
. [COPY] appears in
3
. Then the percentage of
button
bs
.
button
bu
to select the
•
Press the
SCAN REC•
pressed for two seconds. [DELETE] appears in
the display window
•
Press the
BD / ENT
deleted automatically.
Promote Control
L
You can also operate the device with the remote
control.
Tip!
Familiarise yourself with use of the similar buttons
dn
.
on the remote control (see Fig. F). Please see the
layout of the control panel
do
.
Ensure that the front edge of the remote control is
pointing in the direction of the sensor
control panel
1
.
•
Please note that the AF function only works
with the
AF
•
Please also note the modified procedure for:
Adjusting the Volume
•
Increase the volume by pressing the
3
button
gt
VOL+
•
Reduce the volume by pressing the
button
hm
VOL-
Insert the battery
•
Activate the unlock button
battery holder
ment
ir
(see Fig. G).
•
Place a Lithium battery type CR202, 3 V DC
into the battery holder
marked with "+" faces up. Then slide the
battery holder
ir
until it distinctly catches.
button
bt
and keep it
3
.
bs
-Taste
. The current track is
1
for the functions.
co
of the
7
button
on the control panel
.
.
it
and pull the
is
from the battery compart-
is
so that one side
is
into the battery compartment
1
.
Hide quick links:
Advertisement
Table of Contents
