Operation
EON: (ON / OFF): EON function on or off.
•
Turn the "SEL / VOL" control knob
reads [EON ON]; the EON function
display
3
is now activated.
•
Turn the "SEL / VOL" control knob
3
reads [EON OFF]; the EON function is
display
now deactivated.
DSP: (NONE / CLAS / ROCK / POP / FLAT):
Selection of an acoustic pattern for various
playback styles of music and language with
preset bass and treble levels.
•
Turn the "SEL / VOL" control knob
[NONE] appears in the display window
acoustic pattern of your setting for [BAS] and
[TRE] is selected.
•
Turn the "SEL / VOL" control knob
[CLAS] appears in the display window
acoustic pattern for classical music is selected.
•
Turn the "SEL / VOL" control knob
[ROCK] appears in the display window
acoustic pattern for rock music is selected.
•
Turn the "SEL / VOL" control knob
[POP] appears in the display window
acoustic pattern for pop music is selected.
•
Turn the "SEL / VOL" control knob
[FLAT] appears in the display window
acoustic pattern for speech is selected.
Your settings are automatically stored.
The device automatically changes back to playback
mode after five seconds.
Adjusting volume
L
•
Increase the volume by turning the "SEL / VOL"
cp
control knob
clockwise.
•
Reduce the volume by turning the "SEL / VOL"
cp
control knob
counter clockwise.
Mute Function
The mute function enables you to turn off the
loudspeakers.
•
Press the
button
MU
and [MUTE] appears in the display window
•
Press the
button
MU
16
GB/IE
cp
until the
cp
until the
cp
until
3
. The
cp
until
3
; the
cp
until
3
; the
cp
until
3
; the
cp
until
3
; the
cl
. Playback is muted
3
.
cl
again. Playback
continues as before the MUTE function was
activated and [MUTE] disappears from the
display window
3
.
Loudness Function
The loudness function increases the playback level
of the bass sounds when the volume is low.
•
Press the
LD / MD
•
down for approximately 2 seconds. The loudness
function is activated, [LOUD ON] appears in
the display window
•
Turn the "SEL / VOL" control knob
[LOUD OFF] appears in the display window.
•
Press the
LD / MD
•
it held down for approximately 2 seconds. The
loudness function is deactivated, [LOUD OFF]
appears in the display window
[LOUD].
Setting the 3-Band PLL Tuner
L
Press the
button
LD / MD
•
3
in the display window
You can select 3 x FM frequency bands (FM1, FM2
and FM3), 2 x medium wave frequency bands (MW1
and MW2) and 1 x long wave frequency band. Each
frequency band has six presets on which you can
store radio stations.
•
Press the
button
BD / ENT
frequency band you wish to receive. In the display
window
3
you will now see the designation of
the frequency band (e.g. [FM2]), the frequency
(e.g. [99.20]) of a radio station that is being
received or the programme ID during stereo
reception and [TP] for traffic information.
Automatic Station Search
•
Start the station search at lower frequencies
by briefly pressing the
tuner automatically plays back the next radio
station that it receives and shows the
information in the display window
•
Start the station search at higher frequencies
by briefly pressing the
tuner automatically plays back the next radio
station that it receives.
bu
button
and keep it held
7
followed by [LOUD].
co
again.
button
bu
again and keep
3
followed by
bu
until TUNER appears
.
bs
and select the
6
button
. The
9
3
.
button
5
. The
: