input and microphone input).
* Adjustment is not possible while muted ([OWN] selection indicator is blinking)
• When [OTHER] is lit
Adjust the volume of another microphone (Refer to the table in this page.)
• When [LINE] is lit
Adjust the volume of the external device (CD player or MD player) that is connected to the
line input connector of the receiver that receives the audio from the microphone.
Note:
• The adjusted volume can be reset by turning off the power switch of the receiver.
It is not reset by turning off the power of the microphone.
• While the microphone is muted, volume control of the [OWN] microphone is disabled but
enabled for [OTHER] and [LINE].
16
Rev.1.0