Troubleshooting - Panasonic K-STD14 User Manual

Trouble shooting
Before asking for repairs, check the symptoms with the following table.
Contact a dealer if the suggested remedies do not correct the problem or if the problem is
not described below.
Symptom
The power cannot be turned on.
Does not use
(at the time of Power ON,CHG LED is RED)
Volume too low
(No sound)
No sound from the microphone opening
No sound
Cause/solution
• Is the battery charger connected to the
microphone (with no battery)?
>> Connect the charger to the microphone.
Is microphone charging?
(CHG indication RED or RED brink)
>>Please extract a charge cable.
• Is the battery depleted?
>> Charge the battery.
Pairing registration with a receiver has not been
performed.
>>
(1) Press a receiver's [LINK] button, and a receiver is
made into register mode.
(2) Press simultaneousl
utton will register for receiver.
b
state)
Is the volume of the [OWN] microphone
turned down?
>> With the [OWN] selection indicator lit, press the
volume button to increase the volume.
Is the receiver set up correctly?
>> Check the settings.
Is any external device connected to the external
input terminal or microphone input terminal?
>> Connection of an external device or external
microphone, even if not powered up, disables sound
transmission from the microphone opening of the
microphone.
Unplug the connected devices
Does the [OWN] selection indicator blink?
>> Press the [PWR/MUTE] button to cancel muting.
26
y [PWR/MUTE] button and [INT/E1]
( microphone power OFF
Rev.1.0