Panasonic K-STD14 User Manual page 27

No sound from an external microphone
Loud noise
No operation possible
(muting, volume adjustment, etc.)
Does not charge
(charge indicator is off)
Does not charge
(The charge indicator blinking, but goes
lights after a few minutes)
Does not charge
(charge indicator is blinking)
Does not use(CHG LED is Yellow blinking)
Is the external microphone connected to the
external input terminal?
>> Connect the external microphone to the
microphone input terminal.
Is an external device (for example, a portable CD
player) connected to the microphone input terminal?
>> Connect the external device (for example, a
portable CD player) to the external input terminal.
Are the [OWN], [OTHER] and [LINE] selection
indicators all lit?
>> Press the [PWR/MUTE] button for 2 seconds or
more to turn off the microphone, and then turn the
power on again
• Is a battery installed?
>> Install a battery.
• Is the micro-USB plug of the charger inserted
all the way into the DC input terminal?
>> Confirm the connection.
Are you trying to charge a battery that has just been
charged?
>> The battery is already fully charged. Remove the
charger from the microphone, and use the
microphone with the battery
Is the battery extremely hot?
>> Disconnect the charger once and allow the
battery to cool off before reconnecting.
Has the battery deteriorated?
>> Deteriorated rechargeable battery will shorten
the battery duration or cannot turn on the
microphone. Replace the deteriorated battery with a
new rechargeable one.
Microphone is out of range.
Please use in the range
27
Rev.1.0