Panasonic K-STD14 User Manual page 17

Muting
If you want to temporarily stop the audio transmitted from this microphone to the receiver for
one reason or another, without turning off the microphone, you can temporarily mute the
audio signals.
OWN OTHER LINE
[OWN] selection indicator
CHG
BATT
SELECT INT/E1
PWR
[PWR/MUTE] button
MUTE
1 Press the [PWR/MUTE] button.
When pressing the [PWR/MUTE] button once, the [OWN] selection indicator starts blinking
and the audio transmitted from the microphone to the receiver is muted. While muting is
activated, audio input of the [OWN] microphone (audio input from microphone opening,
external input and microphone input terminal) is muted. To cancel muting, press the
[PWR/MUTE] button again.
Note:
• After muting is maintained for approx. 5 minutes, the microphone is turned off
automatically.
• In the muted state, volume control of the [OWN] microphone is disabled, but [OTHER] and
[LINE] are enabled.
• The muting operation may become disabled under certain circumstances.
17
Rev.1.0