Panasonic AG-CX350 Operating Instructions Manual page 70

[DTL GAIN(+)]
Sets the detail level of the plus direction (to make brighter).
The items that can be set are as follows.
f [−31]...[31]
[DTL GAIN(−)]
Sets the detail level of the minus direction (to make darker).
The items that can be set are as follows.
f [−31]...[31]
[SKIN TONE DTL A]
Selects the skin tone table that will display the skin tone detail.
Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying the skin tone detail.
You can use only [SKIN TONE DTL A] or use a combination of [SKIN TONE DTL A] and [SKIN TONE DTL B] or a combination of [SKIN TONE DTL A]
and [SKIN TONE DTL C].
The items that can be set are as follows.
f [ON], [OFF]
[SKIN TONE DTL B]
Selects the skin tone table that will display the skin tone detail.
Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying the skin tone detail.
You can use only [SKIN TONE DTL B] or use a combination of [SKIN TONE DTL B] and [SKIN TONE DTL A] or a combination of [SKIN TONE DTL B]
and [SKIN TONE DTL C].
The items that can be set are as follows.
f [ON], [OFF]
[SKIN TONE DTL C]
Selects the skin tone table that will display the skin tone detail.
Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying the skin tone detail.
You can use only [SKIN TONE DTL C] or use a combination of [SKIN TONE DTL C] and [SKIN TONE DTL A] or a combination of [SKIN TONE DTL C]
and [SKIN TONE DTL B].
The items that can be set are as follows.
f [ON], [OFF]
[SKIN TONE ZEBRA]
Set to display a zebra pattern in the skin tone area displayed in the viewfinder screen.
The zebra pattern is displayed when this item is set to [ON] and [SKIN TONE DTL A]/[SKIN TONE DTL B]/[SKIN TONE DTL C] is activated.
The zebra pattern displays the area selected in [SKIN TONE DTL SETTING].
The items that can be set are as follows.
f [ON], [OFF]
[SKIN TONE DTL SETTING]
[DETECT TABLE]
Selects the skin tone table of the subject that displays the skin tone detail.
The items that can be set are as follows.
f [A], [B], [C]
[SKIN DTL EFFECT]
Sets the effective level of the skin tone detail.
The items that can be set are as follows.
f [0]...[31]
[I CENTER]
Sets the center position of the upper I axis (setting the area that applies the skin tone).
The items that can be set are as follows.
f [0]...[255]
[I WIDTH]
Sets the width of the area that displays the skin tone of the upper I axis that focus on [I CENTER].
The items that can be set are as follows.
f [1]...[3]
[Q WIDTH]
Sets the width of the area that displays the skin tone of the upper Q axis that focus on [I CENTER].
The items that can be set are as follows.
f [1]...[3]
Chapter 4 Operation — Menu settings
– 70 –