Panasonic AG-CX350 Operating Instructions Manual page 82

[AV OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <AV OUT> terminal. The settings of the zebra signal follow the settings in the
[VIDEO OUT/LCD/VF] menu → [EI ASSIST] → [ZEBRA].
[ON]
[OFF]
(Factory setting: [OFF])
[SD DOWNCON MODE]
Sets the mode of the SD down converter output signal from an external output terminal.
[SIDE CROP]
[LETTER BOX]
[SQUEEZE]
(Factory setting: [LETTER BOX])
[LCD]
[BRIGHTNESS]
Adjusts the brightness of the LCD monitor.
The items that can be set are as follows.
f [−15]...[15]
(Factory setting: [0])
[COLOR LEVEL]
Adjusts the color level of the LCD monitor.
The items that can be set are as follows.
f [−15]...[15]
(Factory setting: [0])
[CONTRAST]
Adjusts the contrast of the LCD monitor.
The items that can be set are as follows.
f [−30]...[30]
(Factory setting: [0])
[BACK LIGHT]
Adjusts the brightness of the LCD monitor backlight. [0] is the standard brightness.
The items that can be set are as follows.
f [−1], [0], [1], [2]
(Factory setting: [0])
[SELF SHOOT]
Sets the display of the LCD monitor when mirror shooting is performed.
[NORMAL]
[MIRROR]
(Factory setting: [MIRROR])
[VF]
[BRIGHTNESS]
Adjusts the brightness of the viewfinder.
The items that can be set are as follows.
f [−15]...[15]
(Factory setting: [0])
[COLOR LEVEL]
Adjusts the color level of the viewfinder.
The items that can be set are as follows.
f [−15]...[15]
(Factory setting: [0])
[CONTRAST]
Adjusts the contrast of the viewfinder.
The items that can be set are as follows.
f [−30]...[30]
(Factory setting: [0])
Chapter 4 Operation — Menu settings
Superimposes.
Does not superimpose.
Outputs an equal top and bottom width.
Outputs an equal right and left width.
Outputs by compressing in the horizontal direction to fit the screen.
Does not invert the left and right sides.
Inverts the left and right sides.
– 82 –