Siemens SIMATIC NET Operating Instructions Manual page 26

Description of the device
3.6 "SET" button
Display mode
In display mode, you can see which configuration is currently set.
In display mode A, you see the set startup time. In display mode B, you see the set
monitoring voltage.
Changing to a display mode
1. To change to a display mode, press the "SET" button.
Pressing the "SET" button
starting from the "OFF" mode
Press once
Press twice
Press three times
Note
LED display
You will find the corresponding LED displays in the sections ""DM" LED (Page 28)" and
"LEDs "S1" and "S2" (Page 29)".
Configuration mode
In configuration mode, you can modify the current configuration. For each display mode,
there is a corresponding configuration mode.
You can set the startup time in configuration mode A. You can set the monitoring voltage in
configuration mode B.
Changing to a configuration mode
1. To change to a configuration mode, first change to a display mode.
2. To change from the display mode to the corresponding configuration mode, press the
"SET" button for 5 s.
Once you have changed to a configuration mode, you can see the current configuration.
Pressing the "SET" button
starting from the "OFF" mode
Press once and then press once and hold down for 5 s
Press twice and then press once and hold down for 5 s
Press three times
Note
LED display
You will find the corresponding LED displays in the sections ""DM" LED (Page 28)" and
"LEDs "S1" and "S2" (Page 29)".
26
Mode
Display mode A
Display mode B
"OFF" mode
Mode
Configuration mode A
Configuration mode B
"OFF" mode
Operating Instructions, 10/2013, C79000-G8976-C297-02
SCALANCE XC100-4OBR