Technical data
Technical specifications
Design, dimensions and weight
Degree of protection
Weight
Dimensions (W x H x D)
Installation options
Varnishing of the circuit board
MTBF
Optical connectors
Number of fiber-optic cables
Design
Transmission rate
Wavelength
Optical parameters
Attenuation *
P1 (RX) → P2 (TX)
- 40 °C to + 70 ℃
P2 (RX) → P1 (TX)
(Attenuation
P1 (RX) → P1' (TX)
0 °C to 60 °C)
P2 (RX) → P2' (TX)
P1' (RX) → P1 (TX)
P2' (RX) → P2 (TX)
Switching delay
Fiber used
* The wall feedthroughs in the device are specified as having an attenuation value of 0.3 dB. This value is not taken into
account in the specified attenuation values.
44
IP20
550 g
50 x 140 x 125 mm
Installation on a DIN rail
•
Installation on an S7-300 standard rail
•
Installation on an S7-1500 standard rail
•
Yes
160 years
Single mode
4
SM glass FO cable with SC socket
100/1000 Mbps
Lower: 1310 nm
Upper: 1550 nm
Single mode
With TAP function
Without TAP
function
4.1 dB (3.9 dB)
1.2 dB (1.0 dB)
5.7 dB (5.5 dB)
1.2 dB (1.0 dB)
1.2 dB (1.0 dB)
1.2 dB (1.0 dB)
10 ms
SMF28+
Multimode
4
MM glass FO cable with SC socket
100 Mbps
1310 nm
Multimode
With TAP function
4.5 dB (4.3 dB)
6.0 dB (5.8 dB)
1.5 dB (1.3 dB)
10 ms
50/125 μm OM3
Operating Instructions, 10/2013, C79000-G8976-C297-02
SCALANCE XC100-4OBR