GE ApexPro Service Manual page 147

2001989-203C
19. Using a phillips screwdriver, remove the screw securing the RAID card in the
slot.
20. Remove the RAID card from the slot.
21. Using a phillips screwdriver, remove the top screw securing the L bracket to the
top of the CPU module. Loosen the bottom screw securing the bracket and pivot
the bracket 90°.
Loosen bottom
screw
22. Disconnect the power cable connector from the CPU module.
ApexPro™ Telemetry
Parts lists, drawings and replacement
Remove top
screw
164A
047A
033A
020A
7-29