Table of Contents
Advertisement
Authenticating using Passkey Entry
When connecting to a BLE device that requires password authentication, execute Connect in
Passkey Entry.
One of the following pairing dialogs is displayed depending on the Passkey Entry connection.
If you want the next device to pair,
PasskeyDisplay DeviceName
Please enter the following passkey to Remote Device.
Alert level setting
Sub-Procedure setting
Item
Set Alert Level
Select Sub-procedure
Current Alert Level
MOVERIO Pro Developer's Guide (Rev.1.4)
Pairing setting request of BLE
6-digit number (000000-999999) is
acceptable only.
Figure 8-8 FMP_PXP app Profile screen composition
Table 8-8 FMP_PXP app Profile screen composition
Explanation
Set one of the following as the BLE Device Alert Level.
No Alert/Mid Alert/High Alert
You can read the value for the selected sub-procedure.
You can read the value set for the current Alert Level.
130
If you want to set the PasskeyInput
DeviceName as pairs, please enter the
passkey necessary to the device.
Current Alert level
Advertisement
Table of Contents
