Epson Moverio Pro BT-2000 Developer's Manual page 91

6.8.8. setSharpness
Function

Set the sharpness value.
Format

void setSharpness (int);
Parameter

None.
Return value

Model
int
Usage procedure
/*Start camera*/
camera = Camera.open();
/*Acquire current parameter (or default value)*/
Camera.Parameters params = camera.getParameters();
/*Acquire the current sharpness value*/
int sharpness = params.getSharpness();
sharpness++;
/*When the sharpness value enters an available setting range, it is
set*/
if (sharpness <= params.getSupportedSharpnessMax() &&
params.setSharpness(sharpness);
camera.setParameters(params);
}
Important points

After setting the sharpness value in setSharpness,

setParameters.
MOVERIO Pro Developer's Guide (Rev.1.4)
Explanation
Set the sharpness value.
For the BT-2000, you can set -3 to +3.
sharpness >= params.getSupportedSharpnessMin() ) {
Changed content is not reflected until setParameters is executed.
85
be sure to perform