Available Parameters - Epson Moverio Pro BT-2000 Developer's Manual

6.3. Available parameters

A list of available parameters is provided in table 6-2 and 6-3.
Parameter name
Camera Mode
Preview resolution
*1
Video resolution
Depth ON/OFF
*1
Frame rate
*1
Exposure
comensation
*2
White balance
*2
Sharpness
Contrast
*1: The available range varies depending on the mode. See table 6-3 for more information.
*2: Auto exposure works from system software version R1.4.0, and will automatically change the exposure setting
according to surround brightness. If the result of auto exposure is too bright or toodark, please compensate the
brightness by exposure compensation.
*3: White balance is set manually. Make setting according to your usage environment.
Camera Mode
single-through-vga
single-through-720p
single-through-1080p
single-through-5m
depth-only
side-by-side
EDof
MOVERIO Pro Developer's Guide (Rev.1.4)
Table 6 2 List of available parameters
-
Setting region
single-through-vga /
single-through-1080p / single-through-5m /
depth-only / side-by-side / EDof
1080p / 720p / VGA
720p/VGA
OFF/ON
60/30/15/7.5
-5 to +6
Daylight/ Fluorescent/ Warm florescent
-3 to +3
-3 to +3
Table 6 3 List of main parameter combinations
-
Still image
resolution
640x480
1280x720
1920x1080
2576x1936
-
side-by-side
2576x1936
67
single-through-720p
Preview resolution
640x480
640x480
1280x720
640x480
1280x720
1920x1080
640x480
1280x720
1920x1080
-
4096x1936
640x480
1280x720
Default value
/ Single-through-720p
720p
-
OFF
15
0
Fluorescent
0
0
Frame rate
7.5fps
15fps
30fps
60fps
7.5fps
15fps
30fps
7.5fps
15fps
7.5fps
7.5fps
15fps
640x480
7.5fps