Connecting The Bt-2000 To A Computer - Epson Moverio Pro BT-2000 Developer's Manual

2.5. Connecting the BT-2000 to a computer

This section explains how to connect the BT-2000 to a computer after the ADB driver setting has
been completed.
2.5.1.1. BT-2000 settings
Start the BT-2000, and then select "Settings" - "Developer options" - "USB debugging".
2.5.1.2. Install the BT-2000 driver
Connect a USB cable to the computer on which the BT-2000 is running and the ADB driver
settings are complete.
If the computer does not respond, disconnect the USB cable, restart the BT-2000, and then
reconnect the USB cable.
When "New device detected" is displayed on the computer, select [Control Panel] - [Hardware
and Sound] - [Device Manager].
Right-click [bt2pro] from [Other devices], and then select Update Driver Software.
MOVERIO Pro Developer's Guide (Rev.1.4)
18