Installing A Scsi Interface Board - Epson Expression 1680 Setup Manual

Installing a SCSI interface board

Follow the instructions in this section to install a SCSI board and
SCSI software in your computer. You should do this before
installing the scanner driver and software applications.
If you already have a SCSI board installed in your PC or
Macintosh, go to the next section.
Note:
For additional information, see the installation guide that comes with
your SCSI board.
1. Turn off the computer and any peripheral devices. Unplug
any power cords, then disconnect all cables from your
computer.
2. Remove the cover from your computer.
c
3. Insert the interface board into an appropriate expansion slot,
then secure it with the retaining screw.
4. Replace the computer cover and reconnect all cables.
2-8
Setting Up the Scanner
Caution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your computer before handling the interface board or any of
the computer's circuit boards.