Epson Expression 1680 Setup Manual page 37

Note:
If other devices listed in the Scanners and Cameras Properties dialog
box are not connected to the computer when you click Remove,
those devices may also be removed. Be sure to connect and turn on
all the devices listed in the Scanners and Cameras Properties dialog
box before turning on your computer and removing the scanner.
6. Click OK to close the dialog box, then close the Control Panel.
7. Shut down Windows and turn off your computer.
8. Turn off the scanner.
9. Change the scanner's SCSI ID number, or if you are changing
the SCSI board, disconnect the SCSI cable and replace the
board. Then reconnect the SCSI cable.
10. Turn on the scanner, then turn on your computer.
11. When the dialog box below appears, insert your scanner
software CD into your CD-ROM drive, then click OK to
reinstall EPSON TWAIN Pro.
Note:
If the following dialog box appears, browse the CD-ROM for
EPSON\(your preferred language)\Win98, then click OK.
Setting Up the Scanner
2
2-17