4.2
Installing the KX-TDA Maintenance Console and
Selecting Appropriate Country/Area Data
For the system requirements of the PC (e.g., operating system, hardware specifications), refer
to "3.3.1 Installing and Starting the KX-TDA Maintenance Console" in the Installation Manual.
Note
Screen shots reprinted with permission from Microsoft Corporation.
4.3
Programming the Hybrid IP-PBX
Starting the KX-TDA Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code
and connect to the Hybrid IP-PBX for the first time after initialisation (with the factory default
setting), Quick Setup will launch automatically. During Quick Setup, you will setup the following
basic items:
•
Date and Time of the Hybrid IP-PBX. The date and time set on the PC will be used.
•
System Password for installer for PC programming.
•
Operator extension numbers. Operator extensions for all time modes (day/lunch/break/
night) can be assigned.
•
Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 is selected, " " will prefix all
feature numbers.
•
Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for operator
call and Idle Line Access/ARS can be selected.
•
Remote Maintenance Dial Number. Enter the complete telephone number of the PBX
(including the country code). When necessary, this number will be used to access the PBX
from a remote location for maintenance purposes.
12
Getting Started
1.
a.
Save the setup file of the KX-TDA
Maintenance Console on your PC.
b.
Double-click the icon to execute the setup
file.
c.
Follow the instructions of the wizard.
2.
a.
Type the appropriate Country Code.
The KX-TDA Maintenance Console will be
installed with the appropriate default data for
specific country/area.
b.
Click [Next].
c.
Follow the instructions of the wizard.
d.
Click [Finish].
e.
Click [OK].