Panasonic KX-TDA100 Getting Started page 15

Assigning the Incoming Trunk Call Destination
5. a. Double-click "Slot".
b. Change the status of the BRI card to INS.
c. Click [OK].
For analogue trunk user (DIL Setting):
1. Double-click "Incoming Call".
2. Double-click "Port Setting & DIL".
3. Click the "DIL" tab.
4. For necessary items, enter the proper
numbers and selections.
5. Click [OK].
For ISDN trunk user (DDI Setting):
1. Double-click "Incoming Call".
2. Double-click "DDI/DID Table".
3. Click the "Main" tab.
4. For necessary items, enter the proper
numbers and selections.
5. Click [OK].
For ISDN trunk user (MSN Setting):
1. Double-click "Incoming Call".
2. Double-click "Port Setting & DIL".
3. Click the "DDI / DID / TIE / MSN" tab.
4. Set the "Incoming Type" of the desired
ports to "MSN".
5. Click [OK].
Getting Started 15