Panasonic KX-TDA100 Getting Started page 6

CAUTION
To protect the back board from static electricity, do not touch parts on the back board in the
main unit, PSU, and on the optional service cards. To discharge static, touch ground or wear
an earthing strap. Make sure the screws are tighten for secure earthing.
Installing the Power Supply Unit
1.
Insert the PSU along the guide rails.
2.
Push the release lever in the direction of the arrow so that the PSU is made to engage with
the connector on the back board securely.
3. Turn the 4 screws clockwise, in the order indicated by the numbers 1 to 4, to fix the PSU.
Installing the Trunk/Extension Cards
1.
Insert the card along the guide rails.
2.
Holding the card as shown, push the release lever in the direction of the arrow so that the
card is made to engage with the connector on the back board securely.
3. Turn the 2 screws clockwise to fix the cards.
6 Getting Started
Release Lever
Guide Rail
Release
Lever
Guide Rail
Back Board
Screws
Back Board
Screws
3 2
4
1