Hitachi Compute Blade 500 Series Function Manual page 52

6. The screen returns to [Properties].
It may take some ten seconds for the Tag VLAN setting.
Tag VLAN can set to 10 groups (IDs) per device.
Only TCP/IP is supported as a protocol.
If you set 11 or more groups or any other protocol but TCP/IP, the system
equipment may be unstable.
When configuring the Tag VLAN, the properties screen may terminate
improperly and "Application Error" generated in the application "mmc.exe" may
be recorded in application logs.
Check that the Tag VLAN is configured and that communication can be
properly done.
If the Tag VLAN is not configured, return to step 3 and set it again through
step 6. Then check that communication can be done properly.
A Tag VLAN team is added to the [Device Manager] screen.
You may not communicate properly using the adapter with the setting changed
after setting VLAN on the network adapter. If [!] is added to the network
adapter whose setting is changed with the device manager, reboot the OS to
use the adapter.
2-34 LAN Advanced Functions
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)