Hitachi Compute Blade 500 Series Function Manual page 84

8. Repeat the procedure, from step 4 to step 7, to set all necessary VLANs.
9. Make sure to reboot the OS.
10. Select [Control Panel] > [Network and Internet] > [View network status and
tasks]. When the [Network and Sharing Center] screen is displayed, click
[Change adapter settings] to view [Network Connection].
On the [Network Connection] screen, [Local Area Connection] icons are
displayed. Those include equivalent numbers of icons for the LAN devices and
also to teams that the Tag VLAN has been set to. The IP address, the value of
[Local Area Connection] added in Tag VLAN settings, is enabled.To change
the IP address, from [Properties] in [Local Area Connection], select [Network
Protocol (TCP/IP)] and then [Properties].
"Intel(R)xxxxx – VLAN: VLANx" is shown in [This connection uses the following
items:].
Two same team names may be displayed in the [Network Connection] screen
immediately after setting VLAN. Update the display after a while, and it is
properly displayed.
2-66
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
LAN Advanced Functions