Hitachi Compute Blade 500 Series Function Manual page 67

15. Make sure to reboot the OS.
When you have set a team (AFT/ALB/SFT) on a network adapter, you may
not properly communicate using the adpater settings of which have been
changed. Check the network adater with the changed setting using the device
manager. If [!] is displayed, reboot the OS to use the adapter.
Two same team names may be displayed in the [Network Connection] screen
immediately after the setting. Update the display after a while, and it is
properly displayed.
On [Network Connection], [Local Area Connection] icons are displayed. Those
include an equivalent number of icons to the LAN devices and also of teams
set in the LAN advanced function settings. A setting value of [Local Area
Connection] added while setting the advanced LAN function is enabled as an
IP address. To change the IP address, from [Properties] in [Local Area
Connection], select [Network Protocol (TCP/IP)] and then [Properties].
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
LAN Advanced Functions 2-49