Haier AB35S2SC1FA Operation Manual And Installation Manual
Cassette type air conditioner
Hide thumbs
Also See for AB35S2SC1FA:
- Service manual (257 pages) ,
- Operation manual and installation manual (26 pages) ,
- Operation manual and installation manual (26 pages)
Related Manuals for Haier AB35S2SC1FA
Summary of Contents for Haier AB35S2SC1FA
- Page 1 AB25S2SC1FA AB35S2SC1FA 0150523237...
- Page 2 Read the precautions in this manual This appliance is filled with R32. carefully before operating the unit. Service indicator; Read technical Read the operator's manual manual The installation and service of this product shall be carried out by professional personnel, who have been trainedand certified by national training organizations that areaccredited to teach the relevant national competency standards that may be set in legislation.
- Page 3 The products are fulfilled with the requirements in the directive 2011/65/EU of the European parliament and of council on the Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment(EU RoHS Directive) GWP:675 In accordance with the directive 2012/19/EU of the European...
- Page 4 The specification of power cable is HO5RN-F3G 4.0mm . The specification of cable between indoor unit to outdoor unit is HO5RN-F4G 2.5mm...
-
Page 7: Parts And Functions
Parts and Functions Description of YR-HBS01 remote-controller: External View of the Remote-Controller Notes: This series of air conditioners is unable to realize the follow ing keys and functions: HEALTH, ECONOMY,TURBO,QUIET,IFP,FRESH,10• • , HEATER... -
Page 8: Installation Of Batteries
Parts and Functions Installation of batteries Take down the battery box cover Push down the battery box cover while pressing the position of “ ” and then proceed according to the figure to the right: hold the upper body of the remote controller with the left hand, push down the battery box cover in the direction of the arrow with the right hand and then you take down the battery box cover. -
Page 9: Instructions Prior To Operation
Operation IV. Instructions prior to operation Setting temperature recommended Cooling temperature recommended: 26-28°C Heating temperature recommended: 22-24°C Dehumidifying temperature recommended: 21-24°C Air blowing: temperature setting not required. Precautions in Please set an appropriate temperature for infants, children, the old and patients to prevent the discomfort due to the inappropriate temperature setting. -
Page 10: Function Description
Operation V. Function description: 1．Full display with power on: In case of full display, all symbols on the LCD will display; 3s after full display, only the clock will display and the initial clock is 12: 00 a.m. The initial clock is adjustable and will be automatically confirmed after 10s. - Page 11 Operation 7.TEMP: (1).The key is unavailable under the fan mode; (2). The “TEMP.” setting range shall be between 16°C and 30°C under the mode of Smart, Heat, Cool and Dry; (3) While keeping pressing the " TEMP. " key, the temperature will adjust once first and the will change rapidly if holding for long.
-
Page 12: Timer On/Off
Operation Display for 1s Display for 1s Display for 1s Display for 1s Display for 1s 12. SLEEP (1) Valid in ON state. （2）The duration of Sleep shall be fixed at 8 hours, and this duration can’t be regulated. （3）Sleep function is unavailable under the fan mode. 13. - Page 15 -/*, + / ,- .
- Page 18 AB25S2SC1FA AB35S2SC1FA AB25S2SC1FA AB35S2SC1FA...
- Page 19 AB25S2SC1FA AB35S2SC1FA...
- Page 22 AB25S2SC1FA AB35S2SC1FA...
- Page 24 Cautions - The installation of pipe-work shall be kept to a minimum. - Pipe-work shall be protected from physical damage and shall not be installed in an unventilated space, if that space is smaller than Amin(2m2). - Compliance with national gas regulations shall be observed. - Mechanical connections shall be accessible for maintenance purposes.
- Page 25 Cautions Checks to electrical devices - Repair and maintenance to electrical components shall include initial safety checks and component inspection procedures. If a fault exists that could compromise safety, then no electrical supply shall be connected to the circuit until it is satisfactorily dealt with.
- Page 26 Cautions - Become familiar with the equipment and its operation. - Isolate system electrically. - Before attempting the procedure, ensure that: • mechanical handling equipment is available, if required, for handling refrigerant cylinders; • all personal protective equipment is available and being used correctly; •...