Operator Interface And Fields; Operator Interface Password; Initialising The Operator Interface - Siemens Sinorix al-deco STD Operating Handbook

Reading out the data storage unit
4.4

Operator interface and fields

4.4.1

Operator interface password

General information:
The operator interface has already been configured at the factory, and must therefore not be
operated by the user. The following comments are therefore for information only.
The passwords have already been issued to the individual users.
A total of three user groups have been defined:
Manufacturer
End user
4.4.2

Initialising the operator interface

General information:
The initialisation of the units is carried out by the manufacturer.
Press the Save button after entering all the fields.
Field 1 System type
Requires the system model: e.g.
Field 2 System number
Is provided by the manufacturer.
Field 3 Customer number
Is provided by the manufacturer.
Field 4 Serial number of the interface
Is provided by the manufacturer.
The serial number is noted on the interface.
Field 5 Cylinder data
Is provided by the manufacturer
The cylinder number and the valve batch number are recorded
Field 6 Remarks
Can only be used by the manufacturer.
For free use, maximum 16 characters
Field 7 Date
This field is configured by the manufacturer.
When saving, the family name of the user who last worked on the system will be automatically
recorded.
18
Building Technologies
Fire Safety
User passwords from the manufacturer
The end user only has access to the data.
He can read or print out the data. No password is necessary for this.
TM
Sinorix al-deco STD
A54475-A1-A2_EN_05.docx
01.2018