Making Your Own Titles - Sony CCD TRV 64 E Operating Instructions Manual

Making your own titles

You can make up to two titles and store them in the camcorder. We recommend to eject
the cassette before you begin.
Your title can have up to 22 characters.
(1) While the camcorder is in Standby mode, press MENU to display the menu.
(2) Turn the control dial to select TITLE1 SET or TITLE2 SET, then press the dial.
(3) Turn the control dial to select the desired character, then press the dial.
(4) Repeat step 3 until you finish the title.
(5) When you are finished, turn the control dial to select
(6) Press MENU to erase the menu display.
1
MENU
To edit a title you have stored
In step 2, select TITLE1 SET or TITLE2 SET, depending on which title you want to edit,
then change the title.
To move the cursor to the character on the left side, select M.
If you enter 22 characters in step 4
The title is stored immediately (and you can skip step 5).
If you take 5 minutes or longer to enter characters while a cassette is in the
camcorder
The power goes off automatically. Characters you have entered remain. Turn
STANDBY down once and then up again, then proceed from step 1.
To delete a title
At the leftmost character position, select
selecting empty spaces. If you do so, a title full of empty spaces is stored.
44
2
MENU
COMMANDER
ORC TO SET
REC MODE
TITLE COL
TITLE POS
TITLE1 SET
TITLE2 SET
[MENU]: END
3
MENU
Â
C
D
– – – – – – >
TITLE1 SET
N E
F
G
µ
[MENU]: END
– – – – – – >
5
MENU
TITLE1 SET
[MENU]: END
and press the dial. Do not erase the title by
, then press the dial.
MENU
Â
L
M
– – – – – – – >
TITLE1 SET
N
O
P
µ
[MENU]: END
Â
–
•
>
NEW YORK
µ