Installing The Battery Pack - Sony CCD TRV 64 E Operating Instructions Manual

Charging and installing the battery pack

Installing the battery pack

Align the grooves of the battery pack with the receptacles of the camcorder and slide
the battery pack down until it catches on the battery release lever and clicks.
Attach the battery pack to the camcorder securely.
Note on installing the NP-F930 battery pack
Use the camcorder while lifting up the viewfinder slightly.
Note on the battery pack
Do not carry the camcorder by grasping the battery pack.
To remove the battery pack
While pressing BATT RELEASE (PUSH), slide the battery pack in the direction of the
arrow.
You can look at the demonstration of the functions available with this camcorder (p. 28).
8
BATT RELEASE
(PUSH)