Watching On A Tv Screen - Sony CCD TRV 64 E Operating Instructions Manual

Watching on a TV screen

Connect the camcorder to your VCR or TV to watch the playback picture on the TV
screen. When monitoring the playback picture by connecting the camcorder to your TV,
we recommend you to use mains for the power source.
While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion
may occur.
Connecting directly to a VCR/TV with Video/Audio input jacks
Open the jack cover. With using the supplied A/V connecting cable, connect the
camcorder to the LINE IN inputs on the TV or VCR connected to the TV. Set the TV/
VCR selector on the TV to VCR. When connecting to the VCR, set the input selector on
the VCR to LINE.
: Signal flow
If your VCR or TV has an S video jack, connect using the S video cable (not supplied)
[a] to obtain a high quality picture.
If you are going to connect the camcorder using the S video cable (not supplied) [a],
you do not need to connect the yellow (video) plug of the A/V connecting cable [b].
If your VCR or TV is a monaural type
Connect only the white plug for audio on both the camcorder and the VCR or the TV.
With this connection, the sound is monaural.
To connect to a VCR or TV without Video/Audio input jacks
Use an RFU adaptor (not supplied).
S VIDEO OUT
[a]
VIDEO OUT
[b]
AUDIO OUT
(not supplied)
IN
S VIDEO
VIDEO
AUDIO
47