Pc Programming - Panasonic KX-TDA0480 Getting Started

4.1 PC Programming

4.1 PC Programming
For successful operation of VoIP network using the VoIP Gateway Card as a QSIG line service
interface, follow the procedure below to program the Hybrid IP-PBX at each location in the
network. For detailed discussion of related features, refer to the Hybrid IP-PBX Features
Guide.
Note
It is assumed that you have already installed the KX-TDA Maintenance Console for the
Hybrid IP-PBX in your PC.
36 Getting Started
1. Click "Start" "Programs"
"KX-TDA Maintenance Console"
"KX-TDA Maintenance Console".
2. Type the Installer Level Programmer Code
(default: 1234), then click [OK].
3. a.
Click "Connect"
b.
In the next screen, type the system
password for installer (default: 1234).
c.
Click [OK].
The programme menu opens.
4. a.
Double-click "Configuration".
b.
Double-click "IP-GW Port".
Confirm that ports 1 and 2 are in service
(INS).
"RS-232C" or "USB".