Panasonic KX-TDA0480 Getting Started page 37

Note
In the case that you set either one of the IP Gateway ports (1 or 2) to out of service (OUS)
at the Hybrid IP-PBX, also set the corresponding port of the VoIP Gateway Card to out of
service.
Click [Clear] in the screen shown in "Setting Trunk Data*" of "3.4.1 Editing Office Data".
5. a.
Double-click "Line".
b.
Double-click "CO".
c.
Type the CO Name and assign an
unused Trunk Group to be used for all IP
Gateway trunks.
d.
Click [OK].
6. a.
Double-click "System".
b.
Double-click "Numbering Plan".
c.
Double-click "Feature".
d.
Type the dialling number for "Tie Line
Access".
e.
Click [OK].
7. a.
Double-click "Private Network".
b.
Double-click "System Setting".
c.
Type the PBX Office Code for receiving
calls in "Self PBX Code".
d.
Click [OK].
8. a.
Double-click "Private Network".
b.
Double-click "TIE Routing Table".
c.
Type the Leading Digits (i.e., the Office
Code of the destination Hybrid IP-PBX)
and assign the Trunk Group to be used
when making calls.
d.
Assign the number modification, if
necessary.
e.
Click [OK].
4.1 PC Programming
Getting Started 37