NEAX2400 ICS ISDN PRI Installation Notes
Figure 6 shows the connecting routes for accommodation of the LT connector leads to the
PRT and PL0 circuit cards.
5.5
ACBC Command
ACBC: Assignment of Call by Call Service
5.5.1
Floppy Disk Name
CM09
5.5.2
Function
This command is used for assigning, deleting, and displaying the Call by Call
information for an ISDN network.
5.5.3
Precautions
Before assigning data, assign the Outgoing Route Selection Pattern Number (OPR)
via the AOPR command.
5.5.4
Related Reference Command
List up: LCBC
ETI-152A
Figure 6 Connecting Route Diagram
Page 22