Dell EqualLogic PS4210 Hardware Owner's Manual page 16

PS4210 Hardware Owner's Manual
For example, when you install a drive, the timer starts. If you install another drive before 2 minutes have
elapsed, the timer is restarted. If no other drives are installed, the drive is configured after a delay of 2 min-
utes.
• If you install a drive during RAID reconstruction or verification, the new drive will not be configured until
the operation completes.
Removing a 2.5-inch Drive
1. Remove the bezel. See
2. Press the release button (callout 1 in
the array (callout 2).
3. Pull the drive out by the handle until it is free of the drive bay (callout 3).
10
Removing the Bezel on page
Figure 8). The drive latch opens and the drive emerges partway from
Figure 8: Removing a 2.5-Inch Drive
2.
2 Maintaining Drives