Dell EqualLogic PS4210 Hardware Owner's Manual page 23

PS4210 Hardware Owner's Manual
• The Ethernet ports and the Management port each have LEDs that indicate the port's status and activity. See
Table 6.
• Below the release latch is a column of three LEDs that indicate the status of the entire control module. See
Table 7.
Table 6: Ethernet and Management Port LED Descriptions
Ethernet LED
Location
Top (Link)
Bottom (Act)
10GBASE-T
Ethernet
LED Location
Left (Link)
Right (Act)
SPF+ Ethernet
LED Location
Top (Link)
Bottom (Act)
Management
LED Location
Left (Link)
Right (Act)
Figure 15: Control Module LEDs
State
Off
On (green)
Off
On (amber)
State
Off
On (green)
Off
On (amber)
State
Off
On (green)
Off
On (amber)
State
Off
On (green)
On (amber)
Off
On (blinking green)
Description
No power or not connected to network.
Connected to network.
No power, not transmitting, or not receiving.
Transmitting or receiving.
Description
No power, not connected to network, or passive.
Connected to network.
No power, not transmitting, or not receiving.
Transmitting or receiving.
Description
No power, not connected to network, or passive.
Connected to network.
No power, not transmitting, or not receiving.
Transmitting or receiving.
Description
No power or not connected to network.
Connected to network (100mbit).
Connected to network (10mbit).
No power, not transmitting, or not receiving.
Transmitting or receiving.
3 Maintaining Control Modules
17