Installation - NEC Electra Elite IPK II Pc Programming Manual

Document Revision 1
2

Installation

The process of installing PCPro is straight forward. Just run the installation program and
follow the instructions. To install PCPro, the following system requirements should exist.
CPU
Memory
OS
Other
Communication port
Disk Space
TCP Port
When installing PCPro for the first time, the installation program will create a set of default
PCPro accounts. The accounts are:

An install/uninstall will not remove or modify any existing PCPro accounts, or Connection
accounts.
2
Table 1 System Requirements
Pentium III 598MHz (minimum)
Pentium 4 2.5GHz (recommended)
128 MB of RAM
256 MB (recommended)
Microsoft Windows 2000 or higher
Microsoft Internet Explorer 6.0
LAN, RS232 or Modem
25MB for PCPro (minimum)
PCPro needs TCP port 8000
host PC. Communications between PCPro and the KTS occurs on
this port when uploading / downloading via LAN.
TCP port 5963 is required to be open if the Debug Terminal is going
to be used.
Table 2 Default PCPro Accounts
User Name Password
necii 47544
tech 12345678
ADMIN1 0000
ADMIN2 9999
t
o be open between the KTS and the
Access Level
Manufacturer Mode (MF)
Installer Mode (IN)
System Administrator Mode 1 (SA)
System Administrator Mode 2 (SB)
Electra Elite IPK II
Installation