Assigning Unique Cap Number To Each Key - NEC Electra Elite IPK II Pc Programming Manual

Electra Elite IPK II
Multi-Assign
4. Click the Assign Free CAP button. You will see function keys 1~8
given the values 0010 ~ 0017.
5. Click the Apply button to trigger the assignment.
The result will be...
Ext 101
Key 1 = CAP 0010
Key 2 = CAP 0011
...
Key 8 = CAP 0017
2.0.2

Assigning Unique CAP Number to Each Key

In this mode, a unique CAP number will be assigned to each selected
function key across all the selected telephones. To assign a group of
telephones follow the steps below:
Figure 27 Multi-Assignment - CAP Keys (Unique)
1. Select the telephones from the Telephones list by ticking the check
boxes.
2. Select which function keys to set buy ticking the checkbox.
3. Select the Unique CAP number to each key option.
4. Specify the CAP number that the assignment shall start with. Click the
"..." button to pick from the list of not used CAP number ranges.
5. Click the Apply button to trigger the assignment.
Ext 102
Key 1 = CAP 0010
Key 2 = CAP 0011
...
...
Key 8 = CAP 0017
Document Revision 1
Ext 105
Key 1 = CAP 0010
Key 2 = CAP 0011
...
Key 8 = CAP 0017
47