Hematek Pump Tube Set; Hematek Underplaten Tubing; Ordering Information For Supplies And Replacement Parts - Siemens Hematek Operating Manual

Hematek Pump Tube Set

The Pump Tube Set consists of three tubes, each labeled with an identifying number
specific to the reagent to be carried in the tubing. Each tube is a specific diameter and
length to ensure precise measurement of the reagents. The tubing is made of a special type
of rubber that is resistant to leaching and brittleness.

Hematek Underplaten Tubing

The Underplaten Tubing is available for periodic replacement. The tubing set consists of
three tubes of equal diameter and length and, therefore, are not specific to a reagent.

Ordering Information for Supplies and Replacement Parts

To order the following Hematek brand products, contact your local technical support
provider or distributor.
Part Number
4481
4405
4482A
4483A
4484A
40151108
94000787
94001073
Section 8: Service, Supplies, and Replacement Parts, Page 8—7
Description
Hematek Stain Pak – Wright's Stain
Hematek Stain Pak – Wright-Giemsa Stain

Hematek Pump Tube Set

Hematek Cannula Set

Hematek Underplaten Tubing

Line fuse – 1.0 amp, 5mm x 20mm, Type T
Light Assembly (Green)
POWER
Light Assembly (Yellow)
LOW STAIN