Pioneer PDP-503CMX Product Training Manual page 102

PDP-503CMX, PDA-5002
COLOR TEMP (VIDEO OPTION)
Name
COLOR
IC102
TINT
MCONTRAST
MBRIGHT
R HIGH
G HIGH
IC30
B HIGH
R LOW
G LOW
B LOW
COLOR MODE2 (VIDEO OPTION)
Name
COLOR
IC102
TINT
MCONTRAST
MBRIGHT
R HIGH
G HIGH
IC30
B HIGH
R LOW
G LOW
B LOW
Calculation of Adjustment Value in the Service Factory Mode
• As for the adjustment value in the service factory mode, it becomes an actual adjustment value that subtracted OFFSET reference value
(value in [ ] of the above table) from the value that added a REFERENCE adjustment value and an OFFSET adjustment value.
Notes: It becomes the adjustment value the value that adjusted it with REFERENCE because there is not an OFFSET adjustment value as
forR SIDE MASK LEV, G SIDE MASK LEV and B SIDE MASK LEV of item SIDE MASK LEVEL and X-SUS-B, X-SUS-G, Y-
SUS-B, Y-SUS-G, V-SUS and V-OFFSET of item DIGITAL.
• As for COLOR MODE2 and COLOR TEMP, it becomes OFFSET value of each the value that subtracted OFFSET reference value (a value
in [ ] of the above table) from a adjustment value of selected mode. It becomes a adjustment value of the last RGB 2 device (IC30 and IC102)
the value that added this OFFSET value to each adjustment item of RGB 2.
Actual Calculation Example
• Each adjustment value of SLOT/ RGB 1/RGB2/DIGITAL
(REFERENCE value)
+
{ (OFFSET value) – [OFFSET reference value] } ... Calculation of a value to add as OFFSET
• COLOR MODE2 OFFSET value
{ (COLOR MODE2 adjustment value) - [OFFSET reference value] } ... Calculation of a value to add as OFFSET for COLOR MODE2
Note: Add it only in COLOR MODE2 selection.
• COLOR TEMP OFFSET value
{(COLOR TEMP adjustment value) - [OFFSET reference value] } ... Calculation of a value to add as OFFSET for COLOR TEMP
Note: Add it only in COLOR TEMP 1,2,4 and 5 selection.
Perform the addition in the normal operation, menu mode and COLOR TEMP adjustment mode of the service factory mode (in item VIDEO
OPTION), and add OFFSET value of selected setting.
COLOR TEMP OFFSET does not add it in order to work by COLOR TEMP 3 setting in the integrator mode and in the service factory mode
except COLOR TEMP adjustment mode.
102
OSD Display Name RS-232C Command
COLOR
TINT
CONTRAST
BRIGHT
R. HIGH
G. HIGH
B. HIGH
R. LOW
G. LOW
B. LOW
OSD Display Name RS-232C Command
COLOR
TINT
CONTRAST
BRIGHT
R. HIGH
G. HIGH
B. HIGH
R. LOW
G. LOW
B. LOW
Service Factory Operation
VOP-CT-3
VOP-CT-4
VOP-CT-1
VOP-CT-2
VOP-CT-5
VOP-CT-6
VOP-CT-7
VOP-CT-8
VOP-CT-9
VOP-CT-10
Service Factory Operation
VOP-CM2-3
VOP-CM2-4
VOP-CM2-1
VOP-CM2-2
VOP-CM2-5
VOP-CM2-6
VOP-CM2-7
VOP-CM2-8
VOP-CM2-9
VOP-CM2-10
Adjustment Range
(OFFSET Reference Value)
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
0 to 255 [255]
0 to 255 [255]
0 to 255 [255]
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
Adjustment Range
(OFFSET Reference Value)
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]
0 to 255 [255]
0 to 255 [255]
0 to 255 [255]
0 to 255 [128]
0 to 255 [128]
0 to 255 [128]