Making An Enhanced Private Call (Trunking Only); Switching Between Repeater Or Direct Operation Button - Motorola APX Series User Manual

English
Making an Enhanced Private Call
(Trunking Only)
Your radio must be preprogrammed to allow you to use this
feature.
1 Press the preprogrammed Quick Access (One-
Touch) Private Call button to dial the
preprogrammed ID and initiate the Enhanced Private
Call.
The display shows the preprogrammed ID and a
ringing tone sounds.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
When you are connected, the display shows the ID
of the target radio and the ringing tone stops.
If no acknowledgment is received, the display shows
NO ACK.
If the target radio does not respond before the time
out, the display shows NO ANSR.
52
3 Press and hold the PTT button to talk. Release the
PTT button to listen.
4 Press the preprogrammed Quick Access (One-
Touch) Private Call button to return to the home
screen.
Switching Between Repeater or
Direct Operation Button
The Repeater Operation increases the radio coverage area
by connecting with other radios through a repeater. The
transmit and receive frequencies are different.
The Direct or "talkaround operation" allows you to bypass
the repeater and connect directly to another radio. The
transmit and receive frequencies are the same.
Press the preprogrammed Repeater/Direct switch to
toggle between talkaround and repeater modes.
The display shows RPTR MOD if the radio is currently in
Repeater mode.
The display shows DIR MODE and the Talkaround icon if the
radio is currently in Direct mode (during conventional
operation only).